Useful

How to make a walk-in shower?

How to make a walk-in shower?


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

If the walk-in shower is so popular, it is because it is as practical as it is aesthetic. On one level, it allows easy access. It offers advantageous dimensions, can be central or placed in a corner of the bathroom or, why not, of the bedroom. It also finds its place under the eaves. Let the do-it-yourselfer reassure themselves: the realization of a walk-in shower is not insurmountable.

An extra-flat shower tray

No successful walk-in shower without the proper equipment. It is therefore imperative to choose the easiest receiver to install in order to simplify the task. We choose it extra flat if we are reluctant to embark on complicated work. It offers the advantage of being embedded in the ground and having only minimalist edges with a height of five centimeters at most. Thanks to its ninety-millimeter drain, it limits the risk of overflow. It is also possible to add a water suction system to optimize the evacuation. Unlike the tiling pan, the extra-flat tray does not need to be covered with a coating. A significant advantage since in addition to saving time, it allows substantial savings. Specialized stores offer extra-flat ceramic shower trays of medium size, and synthetic material for XXL shower trays. These can be rectangular, square or quarter-circle for a very comfortable walk-in shower.

Preparation of the bin location

At the place where the receiver will be placed, it is of course necessary to provide a flow slope. This must be at least ten millimeters per meter, which will allow wastewater to flow naturally to the drainage system. If you choose to embed the receiver in the ground, you must start by digging a space the dimensions of the tank and a height of about twenty centimeters. You do not want to dig the ground to install a siphon, drain and walk-in shower? In this case, you can put it on a base. Be aware however that its access will be more difficult for a person with reduced mobility because the walk-in shower will not be flush with the ground.

Installation of the receiver on waterproofing sheet

Waterproofing is the key point of a successful walk-in shower. First of all, we start by placing in each corner of the wall a sealing strip and, on the floor, a sealing sheet. It is then necessary to cover all the walls of the shower with a layer of tack and then with a specific paint called waterproofing. Respect the drying time before applying a second coat. After 48 hours, it is time to put the plug in place, strictly respecting the instructions on the recipient's packaging. It remains to position it on the sealing sheet. After connecting the drain and the drain system, the silicone gasket can be installed. Then let your imagination run free for the decorative touch of the walk-in shower. Tiles, mosaic, pebbles, shower completely open to the room or designer wall: everything is allowed. Make a walk-in shower following the advice of our partner Minute Facile.